GHL Series High Speed Mixing Granulator

This drying machine is for the granule is around ball shape. Its flow ability is good.The mixing time is short.

Working Principle

Powder raw material is loaded in the vessel. If therere several kinds of powder raw material, they should be mixed well first. And then, adhesive is sprayed or poured directly from the top of the vessel. Together, they will be fully mixed by the mixing blade, and become humid soft material. And then the cutting blade will smash them into uniform granules.

Features of Product

The machine adopts horizontal structure which is reasonable. Air seal shaft for driving, and it might be changed with water when clean the machine. 

Fluidized granulation, the granule is around ball shape. Its flow ability is good.

Compare to traditional process, 25% of adhesive is saved, so the drying time is short.

The mixing time is usually 2-3 minutes, and the granulating time is usually 1-4 minutes. The processing time is only around 1/4-1/5 compare to traditional process.

Dry mixing, humid mixing and granulating processes are completed in the same seal vessel, so to conform to GMP standard.

Technical parameters

Spec (GHL)	unit	10	50	150	200	250	300	400	600
Total volume	L	10	50	150	200	250	300	400	600
Capacity	kg/batch	3	15	50	80	100	130	200	280
Mixing speed	r.p.m	300/600	200/400	180/270	180/270	180/270	140/220	106/155	80/120
Mixing power	kw	1.5/2.2	4/5.5	6.5/8	9/11	9/11	13/16	18.5/22	22/30
Cutting speed	rpm	1500/3000	1500/3000	1500/3000	1500/3000	1500/3000	1500/3000	1500/3000	1500/3000
Cutting power	kw	0.85/1.1	1.3/1.8	2.4/3	4.5/5.5	4.5/5.5	4.5/5.5	6.5/8	9/11
Compressed air required	m3/min	0.6	0.6	0.9	0.9	0.9	1.1	1.5	1.8

 

GHL Series High Speed Mixing Granulator